GrafCet Studio Pro Free Download

This article shows you how to download and install the full version of GrafCet Studio Pro v2.5.0.4 for free on a PC. Follow the direct download link and instructions below for guidance on installing GrafCet Studio Pro v2.5.0.4 on your computer.

About the software

Grafcet-Studio is a modern software tool for the Grafcet standard DIN EN 60848, making it easy and fast to draw a Grafcet chart with copy & paste and auto-completion.

Once the Grafcet chart has been designed, it can be tested with the integrated simulator. So, you can check if the Grafcet behaves as desired. During the simulation you can switch inputs on and off and you can watch how the Grafcet logic reacts. For an even more comfortable simulation, you can connect a virtual system with the Grafcet logic.

In addition, Grafcet-Studio offers the possibility to transfer the Grafcet to a device or PLC at the push of a button. The Grafcet logic no longer needs to be manually converted into a program.

Grafcet-Studio (all Editions) can connect to PLC-Lab (all Editions) over a software interface. The sensors and actuators of the virtual scene are synchronized with the Grafcet logic. So you can test your Grafcet chart in the same way like the real hardware. Virtual scenes are a MUST HAVE when you have many input and outputs.

The main features of GrafCet Studio Pro are:

  • Draw up a GRAFCET chart in accordance with DIN EN 60848
  • Simulate a GRAFCET chart (with or without a virtual machine/plant)
  • Transfer the GRAFCET chart to another device

GrafCet Studio Pro v2.5.0.4 System Requirements

  • Operating system Windows 7 SP1+ or higher
  • Hardware Min. 4 GB RAM or better, CPU: any
  • .NET Framework 4.5.2 and 4.6.2.

How to Download and Install GrafCet Studio Pro v2.5.0.4

  1. Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
  2. Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be:
  3. Run GRAFCET-Studio-Setup_v2504__22_06_2022_1.exe and install the software.
  4. Open the Keygen.rar and run b-gc20.exe. Use the key generated when asked in your setup.
  5. You now have the full version of GrafCet Studio Pro v2.5.0.4 installed on your PC.

Required files

File #1 (30.2 MB)


How do you rate this post?

Click on a star to rate it!

Average rating 4 / 5. Vote count: 5

No votes so far! Be the first to rate this post.