About the software
USB over Network allows to use remote USB devices shared over a local network or the Internet.
It does not matter if you are located in another office or even country, now you can use any USB device remotely as if it was attached to your computer locally.
The program consists of two parts — Server and Client. The Server part is installed on a computer where USB devices are physically plugged in, making it possible to share the devices for remote connection. The Client should be installed on computers where you need to get access to remote shared USB devices.
When you connect remote USB device using a Client part on your PC, it appears as if the device was attached directly to your computer.
Thanks to many years of research and development we were able to release unique USB virtualization technology. It fully emulates the USB stack of remote USB devices on the client side creating the exact virtual copy of each shared hardware USB device.
The program is not limited to some specific models of USB devices. It is compatible with any of them. So, it is really universal solution for the remote access to USB devices. Even the most exotic USB devices can be accessed over network or the Internet.
The main features of FabulaTech USB over Network are:
- Command line control support.
- Works with any virtual machines.
- Mixed 32 and 64-bit environment.
- Single-user and multi-user environments support.
- Hyper-V compatible.
- Compatible with 3D mouse by 3Dconnexion.
- Other solutions.
- Real USB virtualization technology
- Works with any USB devices
- Supports all major operating systems
- Driver-free solution
- USB port sharing
- All your data is secure
FabulaTech USB over Network v6.0.6.1 System Requirements
- Operating system: 32 and 64-bit: Windows Vista, 7, 8, 8.1, 10, Server 2008, 2008 R2, 2012, 2012 R2, 2016, 2019
How to Download and Install FabulaTech USB over Network v6.0.6.1
- Click on the download button(s) below and finish downloading the required files. This might take from a few minutes to a few hours, depending on your download speed.
- Extract the downloaded files. If you don’t know how to extract, see this article. The password to extract will always be: www.mysoftwarefree.com
- Run usb-over-network-client-64bit.msi and install the software
- Run usb-over-network-server-64bit.msi and install the software
- Copy ftusbsrv.exe from the Crack x64 folder into your installation directory, and replace the previous file
- When asked for a key, use the keys found in Serial.txt
- You now have the full version of FabulaTech USB over Network v6.0.6.1 (x64) installed on your PC.
Required files
Password: www.mysoftwarefree.com